Super thin veneers stone paving method
Super thin veneers stone 100% natural rock surface layer, rather than imitation stone products, he is the use of rock stratification, the use of nanotechnology, from the natural rock is stratified, completely retain the natural grain and texture of ultra-thin stone, the overall grain is natural and generous, not imitation stone product film printing product grain.Each piece of ultra-thin stone material is unique, ultra-thin stone from natural shale and sedimentary rock, so each piece of stone has a unique grain and texture, rather than imitation stone product grain compared.
1st is basement treatmen
The bottom surface of ultra-thin stone is suitable for: woodworking board, gypsum board, cement pressure light, ceramic tile, glass, steel plate and other smooth and solid plane.
2st is curly stone, natural expansion
The packing form of large stone is drum, and the stone is naturally unfolded after unpacking. If the temperature is low, you can use a weight to flatten or a hot air gun to heat.
3st is to lay and paste
Because the product is natural stone, each piece of texture color is not the same, before the construction on the ground to arrange the paving plan.
4st is cutting
After the cutting tool is used, the edges are trimmed with a woodworking plane and polished with sandpaper.
5st is to brush the glue
Before gluing, paste the paper along the front edge of the stone to avoid gluing on the stone surface. After that, the back of the stone is covered with scraping glue.
6st is the seams
Adopt a variety of ways to deal with the seams, such as dense assembly, profile, beautiful seam, Angle bump and so on.
7st is construction reinforcement
Facade construction can be reinforced with American paper. The top construction can be reinforced with wooden strips.
8st is stone surface protection
For the space with waterproof demand, the stone surface is coated with water-based protective agent. For the space with antifouling, oil proof and waterproof demand, first brush water-based protective agent on the stone surface, and then brush oil protective agent after water-based protection is dry.